GLASS SLIPPER

This little speed demon will test surfers on every level. With a rounded, scooped nose, diamond tail and rolled bottom, this single fin is best suited to punchy waves with a bit of push. Best sured shorter in length, this board is truly a blast from the past.

5’ 6” - 6’ 10”

HUMUHUMUNUKUNUKUAPUA’A FISH

Straight outta the late 60’s, this Fish is a re-worked classic of Donalds. More angle on the fins and a thinner-blady tail make this board go faster and turn tighter than you ever thought possible on a fish.

Now available with a quad-fin set up for those who are looking to really wind this thing up and discover it’s true potential.

5’ 0” - 6’ 6”

DT QUAD

Similar template to the Bertlemann, but a half inch wider and with a rounder nose. This four-fin swallow tail will have you howling down the line and throwing down carves you never thought of doing before. Loose as a twinny but with as much drive as a single fin, the DTQUAD is an essential item in every surfers quiver.

5’ 5” - 6’ 4”

LARRY BERTLEMANN

This board is the classic definition of late 70’s, early 80’s shortboards. Amazing fun in any type of waves, the Larry Bertlemann will open up your surfing to a whole new level. Not just for “retro” guys, these boards can go straight up vertical and get barreled seemingly at will.

5’ 5” - 6’ 6”

DT TWIN

Similar to the Larry Bertlemann, but different in so many ways. The overall planshape is narrower, giving this twinny more of a “gun” feel. Not as skaty as the Bertlemann, this Twin Fin will handle any size surf it is taken into. A perfect option for when the points are maxing and going off!

5’ 8” - 6’ 8”

RETRO PIN

A round pintail, single fin version of the DTTWIN. These boards have a very flat deck, meaning the thickness is kept right to the rail. A perfect single fin gun whether shaped smaller for super barrelly days, or longer for those Indo trips when you need all the help you can get. Very pleasing on the eye and feels even better under your arm.

6’ 0” - 10’ 0”

FLO EGG

The Flo Egg is nothing like the traditional Egg Donald makes, this  board is a low rail, single fin wonder. This one is for those who like the long drawn out, full rail turns of the single fin shortboard days. A throwback to a time when shortboarders still had a log or two in their regular quiver, but who wanted to experience tighter, more in the pocket turns than their longboards allowed them.

NOW AVAILABLE ALSO A 5-FIN FCS SET-UP. RIDE AS EITHER A THRUSTER OR A QUAD. ENDLESS POSSIBILITIES.

6’ 0” - 8’ 0”

EGG

If you're not quite ready to "rip and shred" on a short board, nor are you apt to "cruise" on a long board, then the Hawaiian Pro Designs Egg is the perfect solution. This model is an"eggy" looking shape that allows the rider to trim high on the wave in the middle of the board or race down the line on the tail, whichever the rider prefers. This board is also a perfect beginners board because of the overall forgiving shape that allows for a variety of mistakes without loss of speed or maneuverability. For a beginner or advanced rider, this board is an extremely fun alternative on any day.

6’ 0” - 8’ 6”

NR-3

The NR-3 is a shorter version of the NR-2 log. This is essentially a shrunk-down longboard, and should be ridden accordingly. Not meant to be only surfed from the tail, these boards love to be walked and you can even noseride them! A perfect addition to a longboarders quiver, as the transition is quite easy from long to short with the NR-3.

6’ 6” - 8’ 6”

SCORPION

Donald first came up with this design in the mid 60’s. It has been slightly re-worked and now is basically a smaller version of the Erik Sommer Model. Coming in lengths from 5’6” to 8’, this board will absolutely fly when ridden on the nose. With a true “pin” tail and a 2 + 1 or quad-fin setup, this board will perform the tightest of turns when pushed to it’s limits. An excellent alternative for someone looking for a shorter ‘longboard’.

5’ 6” - 8’ 0”

BEACH BREAK

This tri-fin model can be described as Donald’s high performance progressive longboard. For those that believed Donald to be too old fashioned, feast your eyes on this down the line, straight off the bottom, straight off the top with way too much speed to spare, model. The hard down rails, extra rocker and squash tail all combine to make Donald’s most innovative longboard yet.

9’ 0” - 10’ 0”

KASSIA MEADOR MODEL

Similar to the Beach Break, this board is a design purely for the ladies. Glassed a little lighter than usual, and shaped a little narrower, it will let you perform any type of move you throw at it. A 2 + 1 fin setup, this board is both high performance and a cruiser all in one.

9’ 0” - 9’ 6”

STEPHEN SLATER MODEL

When Stephen first started riding for Donald, they collaborated on a new, more progressive model that would compliment the way Stephen rides. He needed a board that would allow for a full range of surfing, from noseriding to straight up lip bashes. The board was such a success that Donald added to his range. The 2 + 1, round pin-tail, down turned rails appeal to those who want one board in their quiver that is capable of anything and excels in waves of any size.

9’ 0” - 9’ 6”

NOAH SHIMABUKURO MODEL

High Performance Noserider. A board Donald has been making for Noah over the last few years to use in contests. Wide nose and pulled in square tail, extra rocker in the nose and tail, this board was designed to excel in a variety of conditions. Jen Smith recently won the 2007 Women’s World Longboard Championships on it!

9’ 0” - 9’ 6”

ERIK SOMMER MODEL

Very similar design theories as the In The Pink, which is one of Erik’s favourite boards. DT incorporated this idea into Erik’s model which has turned down rails in the nose, perfect noseriding rocker, combined with a pulled in pin tail for tight pocket turns.

9’ 0” - 10’ 0”

IN THE PINK

This board is a modern version of the NR-2. It has a 2 + 1 fin setup, a 60/40 rail and a harder edge towards the tail. These features allow this board to be a high-performance noserider. Brilliant when surfed from the tail, but also giving the rider the chance to perform noserides they never thought possible! This board will get you accustomed to the nose and you will never want to get off!

9’ 0” - 10’ 0”

DT-1

The ‘Speed Shape’. The name says it all. Perfect for the surfer looking for a longboard to handle the juice when going overseas. With a comparatively narrow nose and tail and 2 + 1 fin setup, this board is a virtual rocket ship! Thrives on shoulder high and over waves that have steep faces. This board handles racetrack sections with ease and is one of Donald’s most popular models.

9’ 0” - 12’ 0”

DT-2

Donald’s ‘all-rounder’. This board was designed with more focus on noseriding than the DT-1. With the ability to do it all, turns, trim, noseride, this board could easily be a one board quiver. Working in waves from ankle high to well overhead, the DT-2 can be ridden and enjoyed by everyone.

9’ 0” - 12’ 0”

DT-4

The outline of this round-tail board was designed very similar to the DT-3. The round-tail allows this board to make fast snappy turns while holding in on steep sections. The DT-4 gives way to smooth turning ability, and as with most of Donald’s boards, this is an excellent noserider.

9’ 0” - 12’ 0”

DOUBLE ENDER

Donald pulled this design from his repertoire in the early 50’s and 60’s. It is a classic retro design, glassed in 10 oz. Volan cloth so the weight stays true to the era from which it originated. So called the ‘Double Ender’ because both the nose and tail are slightly pulled in for speedy, overhead sections. Although this board can be ridden in any size wave, it’s full potential shines in waves that are overhead.

9’ 0” - 10’ 2”

NR-2

The retro version of the DT-2, with 10 oz. Volan cloth , single pivot fin and a square tail. The NR-2 is constructed for noseriding and trimming, blended with surprisingly easy turning capabilities. This design is similar to Donald’s Model T with the exception of the tail width, this helps the board turn just that little bit tighter.

9’ 0” - 10’ 2”

MODEL T

This design is easily the best and most ridden of Donald’s classic retro line. Once you have a ride on a Model T you will never want to ride another log EVER! With a broad, easily noseridable nose, and a wide, surprisingly loose tail, this board is what every one of Donald’s team riders has in their competitive quiver. With it’s 60/40 rails, single pivot fin, square tail and 10 oz. Volan cloth, this board is perfect for surf which is ankle high to head high.

9’ 0” - 10’ 2”

STEP DECK

A True classic. This is a design from the mid 60’s when surfing was all about getting on the nose and staying there. With a scooped out nose, narrower tail and big pivot fin, this board will have you surfing like you would never have thought. An ease to noseride and a trimming machine. Perfect for the points.

9’ 0” - 10’ 2”

CLASSIC NOSERIDER

Pure old school joy. Donald came up with this design in the 60’s when surfing was all about getting on the tip. An exceptional log, but also extremely versatile in any size waves. The Rolls Royce of Donald’s classic longboards. Single glass on pivot fin, 10 oz. Volan cloth with knee patch, and balsa/cedar/foam t-band stringer with high density foam tail block.

9’ 0” - 9’ 10”

LJ RICHARDS MODEL

This is Donald and LJ Richards collaboration on a more versatile noseriding board. The diamond tail with the 2 + 1 fin set up allows this board to pivot more from the tail. The boards outline is very similar to the DT-2, the difference is that this board is more stable on the nose and is easier to turn.

9’ 0” - 10’ 0”

DT-3

With this diamond tail, tri fin longboard you will be able to punch through any section, without losing speed and set up for either those tight whippy turns in the pocket, or those high speed noserides. This board is all about flowing from one turn to the next, and as with all of Donald’s designs, the DT-3 is also an excellent noserider. The nose is also slightly broader than the DT-1, but not as broad as the DT-2.

9’ 0” - 10’ 0”

PIG

Purely late 50’s, early 60’s design. For those of you looking for a board that holds true to D-Fin tradition, then this board is for you. A real test to noseride, this totally rolled bottom, narrow nosed, wide-hipped tail log has a 9 1/2” Reverse Pixie D-Fin and surprisingly turns on a dime. Wide hips in the tail, mean that the extra curve in the rail towards the back which equals a much easier board to turn that most other logs.

9’ 3” - 9’ 11”

DT JOEY

Inspired by the 1984 Pipe Masters champion Joey Buran. Donald shaped this design in the 80’s for the California Kid to ride and showcase his skills. Originally shaped as a thruster, this board now comes with a 5-fin option to be ridden as either a quad or a thruster.

Flatter deck means boxier rails for more floatation, and a flatter, slightly rolled bottom makes this board a side slipping rocketship.

Goes in anything from ankle high slop to well overhead barrels, the Joey is the perfect shortboard for someone who doesn’t want to step down to the wafer thin variety.

5’4” - 6’6”